Rules question
21 Jul 2021 16:36 #1
by Lonbordin
Rules question was created by Lonbordin
What better first post (in a long time) than a rules discussion.
Section 5.02 RUDDER:
(d) The sides shall be flat and parallel, and may be tapered in the outer 13/4" (3.2cm)
So that's either 1 & 3/4 inches or 3 & 1/4 inches, spacing is so critical...
I'm assuming, and those I've spoken to, that it is it's 1 3/4 inches. If so, 1.75" converts to 4.445 cm, not 3.2 cm.
So how is that corrected in the rules?
Mahalo- Dave
Section 5.02 RUDDER:
(d) The sides shall be flat and parallel, and may be tapered in the outer 13/4" (3.2cm)
So that's either 1 & 3/4 inches or 3 & 1/4 inches, spacing is so critical...
I'm assuming, and those I've spoken to, that it is it's 1 3/4 inches. If so, 1.75" converts to 4.445 cm, not 3.2 cm.
So how is that corrected in the rules?
Mahalo- Dave
Please Log in to join the conversation.
22 Jul 2021 09:01 #2
by Chris Z
Replied by Chris Z on topic Rules question
It is 1 3/4" and I plan for us to to do a complete review of the rules once sailing season is done and will make the correction.
Please Log in to join the conversation.
Time to create page: 0.036 seconds
- You are here:
- Force 5 Class Home Page
- Forum
- Class Forum
- Racing Section
- Rules question